Avaya Configuring IP Services Manual do Utilizador descarregar pdf (Página 127)

100

101

Configuring and Customizing IP

303528-A Rev 00

4-51

Configuring an Interface for an ATM Logical IP Subnet

RFC 1577, “Classical IP and ARP over ATM,” is a specification for an

administrative entity within an ATM network called a logical IP subnet (LIS). Bay

Networks supports RFC 1577. For information about configuring IP interfaces on

an ATM LIS, see Configuring ATM Services.

You can use the BCC or Site Manager to do the following:

• Specify the ATMARP mode: client or server. You must configure one

ATMARP server for each logical IP subnet you define.

• Define the ATM address network prefix of the ATMARP server on your

network. A complete ATM address consists of a network prefix and a user

part.

• Define the user part (suffix) of the ATM address for the ATMARP server on

your network. The user part suffix consists of a 6-byte end station identifier

and a 1-byte selector field.

• Specify (for a client) the interval between registration refreshes.

• Specify (for a server) the duration for which the registration is valid.

Using the BCC

To specify the ATMARP mode, navigate to an IP interface-specific prompt and

enter:

arp-mode

mode

mode is one of the following:

client

(default)

arp

To specify the address of an ATM server, navigate to an IP interface-specific

prompt and enter:

arp-server-address

address

address is a hexadecimal address.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 649 650

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Services Manual do Utilizador Página 127

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Services