Avaya Configuring Interface and Router Redundancy Manual do Utilizador descarregar pdf (Página 51)

Configuring Router Redundancy

308626-14.00 Rev 00

5-9

Parameter: Send PDU Enable

Default: Enable

Options: Enable

Disable

Function: Enables or disables sending of router redundancy PDUs on a per-circuit

basis. This parameter is automatically set to Enable when you choose

Router Redundancy from the Select Protocols window.

At least one interface on each router in the group must have this parameter

enabled so that all routers in the group receive status information about

each other. You may want to disable this parameter on some redundant

interfaces to minimize network traffic on a busy interface.

Instructions: Choose Enable or Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.2.1.6

Parameter: Primary MAC Address

Default: None

Options: Any unique, 48-bit MAC address that the network manager provides

Function: The primary router uses the MAC address to route data. When the

primary router fails and a backup router becomes the new primary router,

the new primary router assumes this MAC address.

Instructions: Enter a unique MAC address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.2.1.4

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 89 90

Sem comentários

Avaya Configuring Interface and Router Redundancy Manual do Utilizador Página 51