Avaya BCM 4.0 LAN CTE Guia de Configuração descarregar pdf (Página 19)

Chapter 2 Configuring the BCM system and clients 19

LAN CTE Configuration Guide

Connecting to a different BCM

If you want the client computer to connect to a different BCM than the one to which it is currently

connected, you must change the IP address for the BCM at the command prompt of the computer.

To change the client computer connection

1 On the computer, click the Start button and select Run.

The Run dialog box opens.

2 In the Run dialog box, type cmd and click Ok.

The command prompt window opens.

3 At the command prompt, type ctebcmid and press Enter.

The response shows the current BCM IP address.

4 To change the current IP address, type the command ctebcmid <New IP address> and press

Enter.

Note: If you use TAPI applications, the change does not take effect until you

reboot the PC.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Sem comentários

Avaya BCM 4.0 LAN CTE Guia de Configuração Página 19