Avaya COMPANION Guia de Configuração descarregar pdf (Página 35)

Chapter 1 Installing the Companion system 35

Business Communications Manager Companion Configuration Guide

Installing an indoor directional antenna

The indoor directional antenna has a backplate that allows for easy installation on a wall. The

antenna is installed half way between the floor and the ceiling.

For some applications (for example, a stairwell), you can install the antenna on the ceiling.

1 Use four screws to install the antenna. Refer to the following figure.

Figure 14 Indoor directional external antenna (Canada)

2 To prevent stress on the coaxial cable, fasten the cable to the mounting surface.

3 Connect the antenna to the appropriate base station radio.

Installing an indoor omnidirectional antenna (Canada)

To install an indoor omnidirectional antenna, use the following guidelines:

• Use the bracket supplied to install the antenna on a wall or ceiling. This bracket provides the

necessary clearance between the floor or wall and the antenna.

• Mount the bracket so that the external antenna is vertical. The recommended installation

position on a wall is halfway between the floor and the ceiling.

1 Insert the antenna in the bracket so that the antenna is vertical.

2 Use two screws to install the bracket to the wall or ceiling.

3 To prevent cable stress on the coaxial cable, fasten the cable to the mounting surface with a

clamp.

4 Connect the external antenna to the appropriate base station.

Note: The coaxial cable length must not exceed 10 m (33 ft.).

Note: The length of the coaxial cable must not exceed 10 m (33 ft.).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Sem comentários

Avaya COMPANION Guia de Configuração Página 35