Avaya COMPANION Guia de Configuração descarregar pdf (Página 15)

Chapter 1 Installing the Companion system 15

Business Communications Manager Companion Configuration Guide

Installing the Companion hardware

The Companion hardware must be in place and configured before you can use the handsets to

connect to the Business Communications Manager. This section describes the installation of the

various pieces of hardware.

The base station has the option of using internal or external antennas. For most installations, the

internal antenna will be used. If you need to install external antennas, refer to “Installing external

antennas and lightning surge protection” on page 30.

This section contains the following information:

• “Remote power interconnect (RPI) unit overview” on page 15

• “Mounting the RPI unit” on page 17

• “Wiring the base station and connecting the RPI” on page 19

• “Companion base station installation overview” on page 26

• “Positioning a Companion base station” on page 26

• “Attaching a Companion base station” on page 27

Remote power interconnect (RPI) unit overview

The remote power interconnect unit (RPI) provides remote power for base station support.

The following figure shows a diagram of the RPI.

Figure 2 RPI unit

Note: Companion wireless availability is region-specific. This option also requires a

software keycode for activation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Sem comentários

Avaya COMPANION Guia de Configuração Página 15