Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 155)

100

101

Customizing RIP Services

308627-14.00 Rev 00

5-17

Listening for a Default Route

By default, RIP ignores inbound advertisements of a default route (0.0.0.0) on the

interfaces where it is configured. You can use the BCC or Site Manager to

configure RIP to listen for a default route and add that information to its internal

routing table.

Using the BCC

To specify whether RIP listens for the default route, navigate to a RIP interface

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

default-listen

action

is one of the following:

enabled

disabled

(default)

For example, the following command causes RIP to listen for a default route on IP

interface 2.2.2.2:

rip/2.2.2.2#

default-listen enabled

rip/2.2.2.2#

Using Site Manager

To specify whether RIP listens for the default route, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

RIP Interfaces

. The IP RIP Interface Configuration

window opens.

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

(continued)

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 373 374

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 155

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP, ARP, RIP, and OSPF Services