Avaya Configuring Frame Relay Services Manual do Utilizador descarregar pdf (Página 79)

Customizing Frame Relay Interfaces

308624-14.10 Rev 01

3-9

For example, if you accept the default of 3 for the error threshold, and the default

of 4 for monitored events, three status exchange errors in a sequence of four

attempted exchanges brings the connection down. Similarly, if you set the error

threshold to 5 and monitored events to 10, five status exchange errors in a

continuous sequence of 10 attempted exchanges brings the connection down.

You can use either the BCC or Site Manager to specify error threshold and

monitored events.

Using the BCC

To specify values for the polling interval, error threshold, full enquiry interval,

and monitored events, see the following sections.

Polling Interval

To set the polling interval, navigate to the dlcmi prompt (for example,

box;

serial/1/2; frame-relay/1/2; dlcmi

) and enter:

polling-interval

integer

is the polling interval, from 5 to 30 seconds. The default is 10.

For example, the following command line changes the polling interval from 10 to

20 seconds:

dlcmi/1/2#

polling-interval 20

dlcmi/1/2#

Full Enquiry Interval

To set the full enquiry interval, navigate to the dlcmi prompt (for example,

box;

serial/1/2; frame-relay/1/2; dlcmi

) and enter:

full-enquiry-interval

integer

is the number of polling intervals that occur before the router sends a full

status inquiry. The value can be 1 to 255 intervals, and the default is 6.

Note:

The error threshold and monitored events do not function if you set the

management type to DLCMI None.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 245 246

Sem comentários

Avaya Configuring Frame Relay Services Manual do Utilizador Página 79