Avaya Configuring Frame Relay Services Manual do Utilizador descarregar pdf (Página 129)

Customizing SVCs

308624-14.10 Rev 01

5-19

Disconnect Timer

The disconnect timer indicates the number of seconds allowed from the time the

router sends a disconnect message and receives a release message back. If a

timeout occurs, the router sends a release message and enters the release request

state. The timer is not restarted.

To set the disconnect timer, navigate to the signalling prompt (for example,

box;

serial/1/2; frame-relay/1/2; signalling/3/2

) and enter:

disconnect-timer

integer

is the number of seconds allowed. The value can be from 20 to 90 seconds.

The default is 30.

For example, the following command line sets a timer of 45 seconds:

signalling/3/2#

disconnect-timer 45

signalling/3/2#

Release Timer

The release timer indicates the number of seconds allowed for call clearing

initiated by the other end of the connection or when the disconnect timer expires.

If a timeout occurs, the router retransmits the release message and restarts the

timer. If the timer expires a second time, the router clears the call.

To set the release timer, navigate to the signalling prompt (for example,

box;

serial/1/2; frame-relay/1/2; signalling/3/2

) and enter:

release-timer

integer

is the number of seconds allowed. The value can be from 2 to 90 seconds.

The default is 4.

For example, the following command line sets a timer of 45 seconds:

signalling/3/2#

release-timer 45

signalling/3/2#

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 245 246

Sem comentários

Avaya Configuring Frame Relay Services Manual do Utilizador Página 129