Avaya Configuring APPN Services Manual do Utilizador descarregar pdf (Página 64)

Configuring APPN Services

3-4

308963-14.00 Rev 00

Parameter: APPN Enable/Disable

Default: Enable

Options: Enable

Disable

Function: Globally enables or disables APPN on the router.

Disable -- Forces every APPN interface existing on the node into the

“down” (inoperative) state.

Enable -- Reinitializes every APPN interface existing on the node; each

interface maintains the most recent setting of its own Interface Enable/

Disable parameter.

Instructions: Select Disable to force every APPN interface existing on the node into the

“down” (inoperative) state.

Select Enable to globally reinitialize all APPN interfaces configured on

the node; each interface will maintain the most recent setting of its own

Interface Enable/Disable parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.2

Parameter: Local Node Name

Default: None

Options: Any valid name with up to 17 characters in the format

;

NETID

is the global network name with up to 8

characters followed by a period, and

CPNAME

is the control point name

with up to 8 characters

Function: The Local Node Name parameter identifies the unique name of the

network and the Nortel Networks router node name.

Instructions: Specify up to 8 characters for the network ID name; follow with a period;

then type a control point name with up to 8 characters. You must use

uppercase characters only and the first character must be non-numeric.

Blank spaces (leading, trailing, and embedded) are not allowed in the

node name. For example, NETWORKA.SYSTEMA is a valid entry for

the Local Node Name parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.4

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 149 150

Sem comentários

Avaya Configuring APPN Services Manual do Utilizador Página 64