Avaya (109352-E, Manual do Utilizador Página 61

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 144
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 60
Installing the Backbone Link Node-2
109352-E Rev. A 2-17
2.
Remove the cable connector from the CONSOLE port of the System
Resource Module-Link (SRM-L).
The SRM-L resides in Slot 1 of the BLN-2 rear panel (Figure 2-7).
3. Insert one end of the modem cable (Order No. 77850) into the
SRM-L CONSOLE port.
4. Insert the other end of the cable into the RS-232 communications port on
the back of the modem.
To configure the BLN CONSOLE port for modem operation, refer to Configuring
Routers (router software) or Getting Started with Site Manager (BayStream
software).
Data Terminal Ready (DTR) signal DTR signal fail-disconnect enabled (return
to command mode, auto-answer off)
Data Carrier Detect (DCD) signal DCD signal on while carrier present (the
node uses DCD to detect modem
disconnect)
Local character echo OFF
Supervisory functions OFF
Data Set Ready (DSR) signal ON
Note: The console cable and the modem cable both connect to the BLN-2
using the CONSOLE port.
Table 2-9. Modem Operating Parameters
(continued)
Parameter Setting
Vista de página 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 143 144

Comentários a estes Manuais

Sem comentários