Avaya Connecting BayStack AN and ANH Platforms to a Network Manual do Utilizador descarregar pdf (Página 71)

Configuring Network Booting

4-11

Netboot Interface Parameters

Parameter: Slot Number

Default: 1

Options: 1

Function: Speciﬁes the physical slot in which the hardware module is installed.

Instructions: Be sure that number 1 appears in the Slot Number box. (ANs and ANHs

have only one slot.)

MIB Object ID: Not Applicable

Parameter: Connector

Default: None

Options: COM1

| COM2 | COM3 | XCVR1 | XCVR2

Function: Identiﬁes the connector conﬁgured as a Netboot interface.

Instructions: Enter the connector name for the Netboot interface.

Enter COM1, COM2, or COM3 if you want to use Netboot over a

synchronous interface. Enter XCVR1 or XCVR2 if you want to use

Netboot over an Ethernet interface. (Note that COM3 and XCVR2 are

valid only with an installed interface upgrade.)

MIB Object ID: Not Applicable

Parameter: Connector IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP address of this interface.

Instructions: Enter the IP address of this interface in dotted decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.4

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 167 168

Sem comentários

Avaya Connecting BayStack AN and ANH Platforms to a Network Manual do Utilizador Página 71