Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador descarregar pdf (Página 53)

Configuring Global BGP Parameters

308628-15.0 Rev 00

3-9

Enabling BGP Interaction with OSPF and RIP

By default, BGP does not exchange routes with OSPF or RIP. However, you can

configure the router to allow BGP to advertise BGP-learned routes to OSPF, RIP,

or both OSPF and RIP.

You can use the BCC or Site Manager to configure the router to advertise

BGP-learned routes.

Using the BCC

To configure the router to advertise BGP-learned information to OSPF, RIP, or

both, go to the BGP prompt (for example,

box; ip; /jointfilesconvert/97454/bgp

) and enter:

igp-interaction

protocols

is one of the following values:

•

none

(default): BGP advertises no routes to OSPF or RIP.

•

ospf

: BGP advertises BGP-learned routes to OSPF.

•

rip

: BGP advertises BGP-learned routes to RIP.

For example, the following command configures BGP to advertise routes to both

RIP and OSPF:

/jointfilesconvert/97454/bgp#

igp-interaction {ospf rip}

/jointfilesconvert/97454/bgp#

Using Site Manager

To configure the router to advertise BGP-learned information to OSPF, RIP, or

both,

complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

(continued)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 275 276

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 53

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)