Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 172)

Configuring SNMP, BootP, and DHCP Services

A-20

308644-15.1 Rev 00

Parameter: Output IP Address

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Forward I/F > Add

Default: None

Options: Any valid IP address

Function: Specifies the IP interface that forwards BOOTREQUEST packets to an external

network.

Instructions: Enter the IP address of a numbered network interface that you want to send

BOOTREQUEST or DHCP packets to servers, and then configure this IP

address on the router, if you have not already done so.

Do not specify an unnumbered interface for this parameter. If you want to use an

unnumbered interface to send BOOTREQUEST or DHCP packets to servers,

you must set up a preferred server.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.4

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Forward I/F

Default: Enable

Options: Enable

Disable

Function: Specifies whether this forwarding route is active.

Instructions: Select Enable to allow BootP or DHCP forwarding through this route. Select

Disable to prevent BootP or DHCP forwarding through this route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.2

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 195 196

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 172