Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 133)

Customizing BootP/DHCP Relay

308644-15.1 Rev 00

5-3

Using Site Manager

To allow the BootP relay agent to forward DHCP packets, complete the following

tasks:

Defining DHCP Servers

If DHCP clients obtain IP addresses and other configuration information from a

DHCP server on a different subnet, connected through a router, then you must

define a DHCP preferred server by specifying the IP address of the BootP relay

agent on the local router and the IP address of the target server. The router can

then unicast a DHCP packet through normal IP services to that server. For

instructions, see “Specifying Servers for BootP Services

” on page 4-21.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Select the address pair that you want to

configure.

7. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-21.

8. Click on

Apply

9. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 195 196

Comentários a estes Manuais

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 133

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring BOOTP Services