Avaya Configuring IPsec Services Manual do Utilizador descarregar pdf (Página 79)

Site Manager Parameters

308630-15.1 Rev 00

A-11

Parameter:

Pre-shared Key (hex)

Path: Configuration Manager > Protocols > IP > IKE

Configuration Manager > Edit Circuit > Protocols > Edit IP > IKE

Default:

None

Options:

Any hexadecimal value

Function:

Used as a cryptographic key for creating IKE SAs between routers. IKE is then

used to create automated SAs for data packets.

Instructions:

Enter a hexadecimal number. (Enter the prefix

before the digits.) Configure

the same preshared key on the destination router.

MIB Object ID:

1.3.6.1.4.1.18.3.5.27.1.1.9

Parameter:

Expiry Value Minutes

Path: Configuration Manager > Protocols > IP > IKE

Configuration Manager > Edit Circuit > Protocols > Edit IP > IKE

Default:

480

Options:

Any integer

Function:

Specifies when an SA key will expire.

Instructions:

Enter a value that is appropriate for your site.

MIB Object ID:

1.3.6.1.4.1.18.3.5.27.1.1.10

Parameter:

SA Destination

Path:

Configuration Manager > Add Circuit > WAN Protocols > PPP

Frame Relay >

Select Protocols > IKE > IPsec Configuration for Interface > Outbound Policies

Configuration Manager > Edit Circuit > Protocols > Edit IP > IKE > Add

Default:

None

Options:

Any valid IP address

Function:

Specifies the IP address of the destination interface for this automated SA.

Instructions:

Enter the IP address of the remote IPsec interface that will negotiate automated

SAs using the specified preshared key.

MIB Object ID:

1.3.6.1.4.1.18.3.5.27.1.1.3

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 121 122

Comentários a estes Manuais

Sem comentários

Avaya Configuring IPsec Services Manual do Utilizador Página 79

Comentários a estes Manuais

Manuais e produtos relacionados com Manuais de software Avaya Configuring IPsec Services