Avaya Configuring IPsec Services Manual do Utilizador descarregar pdf (Página 48)

Configuring IPsec Services

3-4

308630-15.1 Rev 00

Creating an Outbound Policy Template and Policy

To create an outbound policy template and policy, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the IPsec Configuration for Interface

window, click on

Outbound Policies

The IPsec Outbound Policies window

opens.

2. Click on

Template

. The IPsec Policy Template Management

window opens.

3. Click on

Create

. The Create IPsec Template window

opens.

4. In the

Policy Name

field, type a name for

the template.

For a description of this parameter, see

page A-4

5. Use the

Criteria

menu to specify ranges

for the IP source addresses, IP destination

addresses, and protocol criteria.

Note:

If you plan to specify the protect

action, configure both a source and a

destination IP address range.

6. Use the

Action

menu to specify the action

that you want applied to traffic with the

criteria that you just defined.

7. Click on

. You return to the IPsec Policy Template

Management window.

8. To create other policy templates, repeat

steps 3 through 7.

9. Click on

Done

. You return to the IPsec Outbound Policies

window.

10. Click on

Add Policy

. The Create Outbound Policy window

opens.

(continued)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 121 122

Comentários a estes Manuais

Sem comentários

Avaya Configuring IPsec Services Manual do Utilizador Página 48

Comentários a estes Manuais

Manuais e produtos relacionados com Manuais de software Avaya Configuring IPsec Services