
Configuring IP Multicasting and Multimedia Services
5-4
303527-A Rev. 00
Configuring MOSPF Globally
You can use Site Manager to add MOSPF extensions to OSPF.
Note:
Bay Networks does not support dynamic configuration of MOSPF/
QOSPF. After making local configuration changes, restart OSPF by disabling
and reenabling it.
Note:
If you enable MOSPF, do not run other multicasting protocols on any
OSPF interfaces, even if MOSPF is disabled on those interfaces (that is, even if
you set the Multicast Forwarding Parameter to blocked). If you want to disable
MOSPF on a network, use Site Manager to disable MOSPF on all routers in
the network.
Note:
If you are configuring an OSPF network with both MOSPF and
non-MOSPF, set the non-MOSPF routers to priority 0 so that the MOSPF
routers can become designated router and backup designated router
(DR/BDR), which is necessary for MOSPF to work.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
OSPF
. The OSPF menu opens.
4. Choose
Global
. The Edit OSPF Global Parameters
window opens.
5. Set the
Multicast Extensions
parameter.
Site Manager:
Multicast Extensions
parameter: page A-31
6. Click on
OK
. You return to the Configuration Manager
window.
Comentários a estes Manuais