Avaya Configuring ATM Half-Bridge Services Manual do Utilizador descarregar pdf (Página 42)

Configuring ATM Half-Bridge Services

2-12

300017-A Rev. 00

Configuring BootP Preferred Servers

You can configure a BootP preferred server by specifying the IP address of the

relay agent on the router and the IP address of the target server. You configure a

preferred server when you know the IP address of the DHCP server to which you

want to send a DHCP request.

Specifying the Relay Agent IP Address

The relay agent IP address is the interface that you want to receive DHCP packets

from a CPE host. If you configured BootP on an unnumbered interface

(ATM/AHB interface), specify the associated numbered interface address for the

relay agent IP address.

To specify the relay agent IP address, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table opens.

6. Click on

Add

. The BOOTP Preferred Server

Configuration window opens.

7. Set the

Relay Agent IP Address

parameter. Click on

Help

or see the

parameter description on page A-14.

8. Click on

9. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 93 94

Comentários a estes Manuais

Sem comentários

Avaya Configuring ATM Half-Bridge Services Manual do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Manuais de software Avaya Configuring ATM Half-Bridge Services