Avaya Configuring ATM Half-Bridge Services Manual do Utilizador descarregar pdf (Página 33)

Starting AHB Services

300017-A Rev. 00

2-3

Configuring an IP Interface on the Router

You must configure an IP interface on a non-ATM/AHB interface. This can be a

LAN interface or a frame relay interface. You use this IP interface address as the

associated IP interface when defining the unnumbered IP circuit for the AHB

router.

To configure an IP interface on the router, begin at the Module List window and

complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Module List, choose a

link module

(for example, Quad Ethernet).

2. Click on a

link module connector

(for

example, XCVR1).

The Add Circuit List window opens.

3. Supply a

circuit name

(or accept the

default circuit name) and click on

The Select Protocols window opens.

4. Select

, then click on

. The IP Configuration window opens.

5. Specify a valid IP address in

dotted-decimal notation for the

IP address

parameter (for example, 1.1.1.1).

Click on

Help

or see the parameter

description on page page A-15

6. Accept the default values for the following

parameters:

•

Subnet Mask

•

Transmit Bcast Addr

UnNumbered Assoc Address

Click on Help or see the parameter

descriptions on page A-15.

7. Click on

. You return to the Configuration Manager

window.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 93 94

Comentários a estes Manuais

Sem comentários

Avaya Configuring ATM Half-Bridge Services Manual do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Manuais de software Avaya Configuring ATM Half-Bridge Services