Avaya R2 Guia de Instalação descarregar pdf (Página 61)

Administering the DEFINITY System and Configuring the Network

2-22 Configuring a Network

❐ (Windows NT 4.0) Enable DNS for Windows Resolution.

Configuring 2

❐ DNS is not required. However, if you decide to enable DNS, configure it

correctly:

❐ The name in the “Host” field on the Server PC must be the same

as the name of the Server. The name in the “Host” field on the

Client PCs must be the same as the name of the Client.

❐ The entry in the “Domain” field should be the same throughout

the network. Typically, it is a term that identifies your company

or organization. If PCs are on different domains, the domains

must have “trustee relationships.”

❐ Be sure that the numbers in the box entitled “DNS Server Search

Order” are numbers for DNS Servers.

If the domain settings are incorrect, problems may occur. You

may be able to connect to the Server, but you may be quickly

disconnected.

❐ Configure TCP/IP

❐ (Windows NT 4.0) Select the “IP Address” tab and select the radio

button next to “Specify an IP address.” Ask your network

administrator which IP address, subnet mask, and default gateway

to use.

❐ (Windows 95 or Windows 98) Select the “IP Address” tab and select

the radio button next to “Specify an IP address.” Ask your network

administrator which IP address and subnet mask to use.

❐ The Server PC must have a static IP address.

❐ Be sure that TCP/IP protocol is installed on the network. To verify

this, from the Server PC,

(Windows NT 4.0): Open Start/Programs/Command Prompt

and type ipconfig /all (note the space after ipconfig).

(Windows 95 or Windows 98): Open Start/Run and type

winipcfg

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 146 147

Sem comentários

Avaya R2 Guia de Instalação Página 61