Avaya Digital Drop and Insert (DDI) MUX Guia de Instalação descarregar pdf (Página 21)

Installing the DDI MUX 21

DDI MUX Installation Guide

4 With the face of the module towards yourself, insert the media bay module into the open bay,

ensuring that the sides of the module are parallel with the sides of the bay.

5 Gently push the media bay module straight back into the unit.

You will hear a click when the module is firmly seated in the media bay. The module sits

slightly forward from the face of the Business Communications Manager. When the front

bezel is replaced, the module face is flush with the surface of the unit.

6 Replace the front bezel on the base unit.

Starting up the system

After you install the module correctly into the bay, you must return the equipment to operation in

an orderly way.

Follow these steps carefully to ensure that you return your system to operation without

endangering the equipment or yourself.

1 Plug the power cords for the Business Communications Manager base unit and the expansion

unit back into the ac outlets.

2 Connect the telephone and network cables to the proper outlets on the media bay modules and

the MSC.

3 Check that the LEDs on the modules are on and static. Refer to “Installation troubleshooting”

on page 34 for a detailed description of the LED states.

Warning: Insert the DDI MUX carefully and squarely into the housing to ensure that the

power connector on the module correctly and securely connects to the backplane of the

media bay.

Note: The Business Communications Manager system starts up when you connect the ac

power cord. System startup takes several minutes to complete.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sem comentários

Avaya Digital Drop and Insert (DDI) MUX Guia de Instalação Página 21