Avaya Digital Drop and Insert (DDI) MUX Guia de Instalação descarregar pdf (Página 20)

20 Installing the DDI MUX

P0989728 02

4 Unplug any telephone or network cables from all the media bay modules and the MSC on the

Business Communications Manager base unit and the expansion unit.

5 Disconnect the base unit and expansion unit power cords from the ac outlet.

Installing DDI MUX

After the system is powered down, you can install the DDI MUX. Follow this procedure to install

the DDI MUX.

1 Remove the front bezel from the base unit. To remove the bezel, grasp the edges and pull the

bezel forward. Refer to Figure 4.

Figure 4 Removing the front bezel

2 Select an open media bay.

3 Pull the latch beside the selected bay to release the media bay bezel. Refer to Figure 5.

Figure 5 Identifying the media bay module latches

Note: If there is no open media bay, select a media bay module to move to the

Business Communications Manager expansion unit. Do not move a DTM to the

expansion unit.

Business Communications Manager base unit

Grasp the edge of the front bezel and pull

it forward

media bay module latches

Business Communications Manager base unit

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sem comentários

Avaya Digital Drop and Insert (DDI) MUX Guia de Instalação Página 20