Avaya Configuring IP Services Manual do Utilizador Página 58

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 585
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 57
Configuring IP Services
3-4 117356-A Rev. A
Starting RIP
Before you can select a protocol to run on the router, you must configure a circuit
that the protocol can use as interface to an attached network. For information and
instructions, see Configuring WAN Line Services and Configuring Ethernet,
FDDI, and Token Ring Services.
When you have successfully configured the circuit, the Select Protocols window
opens. Proceed as follows:
Site Manager Procedure
You do this System responds
1. In the Select Protocols window, select the
following protocols:
IP
RIP
Then click on OK.
The IP Configuration window opens.
2. Set the following parameters:
IP Address
Subnet Mask
Transmit Bcast Addr
UnNumbered Assoc Address
Click on Help or see the parameter
descriptions beginning on page A-21.
3. Click on OK. You return to the Configuration Manager
window.
Vista de página 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 584 585

Comentários a estes Manuais

Sem comentários