Avaya Configuring IP Multicasting and Multimedia Services Manual do Utilizador descarregar pdf (Página 325)

Site Manager Parameters

117355-D Rev 00

A-47

Parameter: Probe Time

Path: Configuration Manager > Protocols > IP > PIM > Global

Default: 5

Options: 0 to 65,535 (seconds)

Function: Specifies the interval, in seconds, between the time that the first-hop router

sends a probe packet (null register packet with no user data) to the RP router and

the expiration of the register suppression timer, unless it is restarted by receiving

a register-stop message.

Instructions: Specify a value of 0 to prevent the first-hop router from sending a probe packet

to the RP. If you specify a value greater than 0, it must be less than the register

suppression timeout value, otherwise it does not take effect. The highest

allowable value, 65,535 seconds, is equal to 18 hours, 12 minutes, and 15

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.14.1.34

Parameter: Cisco Compatible

Path: Configuration Manager > Protocols > IP > PIM > Global

Default: Disable

Options: Enable

Disable

Function: Allows Bay Networks routers to interoperate with Cisco routers running a

nonstandard PIM implementation.

Instructions: By default, this parameter is disabled to ensure that Bay Networks routers

comply with the standard PIM specification defined in RFC 2362. To allow Bay

Network routers to interoperate with Cisco routers configured with a

nonstandard implementation of PIM, set this parameter to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.14.1.35

1 2 ... 320 321 322 323 324 325 326 327 328 329 330 ... 379 380

Sem comentários

Avaya Configuring IP Multicasting and Multimedia Services Manual do Utilizador Página 325