Avaya Business Ethernet Switch 50 Series Guia de Configuração descarregar pdf (Página 25)

Conﬁguring a converged small site (mixed-vendor environment) 25

•

"Installation and conﬁguration workﬂow for a converged small site

(mixed-vendor environment)" (page 26)

The installation sequence is a critical component of this minimal

conﬁguration scenario. Nortel recommends that you wait a few minutes

between conﬁguring and installing each device to allow each device to

complete the boot cycle.

Connecting network devices for a converged small site (mixed-vendor

environment)

Step Action

Connect the WAN port of the third-party router to the Internet

provider.

Connect the BES100/200 to the LAN port on the third-party router.

Connect the BCM50 to one of the VLAN 1 LAN ports on the

BES100/200.

Connect BAP120s to PoE ports on the BES100/200 if PoE ports are

available. If not, connect BAP120s to LAN ports on the BES100/200.

If Guest Access is required, connect the BAP120s that supply

wireless Guest Access to one or more of the ports designated to

VLAN 2 (guest) on the BES100/200.

—End—

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Sem comentários

Avaya Business Ethernet Switch 50 Series Guia de Configuração Página 25