Avaya Analog Devices Guia de Configuração descarregar pdf (Página 16)

16 Chapter 2 Configuring an analog device DN record

P1013653 02

Reviewing Set restrictions

1 Click on the key beside the Restrictions heading in the DN record.

2 Click on the Set restrictions heading.

Figure 9 Set restriction example

3 Ensure that the Allow Link set restriction is set to Y (Yes) for the analog device.

ATA use On site

Off site

Select the location of the analog device.

The Off site value is supported on analog devices connected to an ASM 8+

module.

Msg Indicate None

Tone

Lamp

Tone sends a Stutter Dial Tone through the telephone receiver when a message is

waiting.

Lamp turns on an indicator light on the telephone when a message is waiting.

The Lamp indication feature is only available for analog devices connected to an

ASM 8+ module.

ATA Dvc Modem

Telephon

Default: Modem

Analog devices can have connectivity issues over BRI/PRI lines. To alleviate this,

you can specify the type of device attached to the line.

Modem supports 3.1 Khz audio; which requires a higher quality of service on the

ISDN trunks. Modems and fax machines require this for reliable information

transfer. If the trunks cannot provide the higher level of service, the call will fail.

Telephon supports speech paths, which require less quality on the trunk; if used for

fax and/or modem, information transfer would be unreliable.

Disconnect

Supervision

Off

Default: Off

This setting is only available for analog devices connected to an ASM 8+ module

using the North American profile.

Set this value to On if you have an analog device that does not automatically

disconnect when the far end hangs up.

This enables the system to disconnect the line from the analog device once it

receives the disconnect signal from the far end.

Note: For a detailed explanation on all Set restriction settings, refer to the Business

Communications Manager Programming Operations Guide.

Table 10 ATA settings (Continued)

Attribute Values Description

1 2 ... 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Avaya Analog Devices Guia de Configuração Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com não Avaya Analog Devices