Avaya FireWall-1 Manual do Utilizador descarregar pdf (Página 61)

Monitoring the Firewall Using BCC show Commands

117384-D Rev 00

A-3

show firewall summary

The

show firewall summary

command displays the current firewall configuration.

The output includes the following information:

State State of the firewall on the router: enabled or disabled.

Version Firewall protocol version number.

Firewall Operational State State of the interface: Up, Down, Init (initializing), or Not Pres (not

present).

Local Host IP address of the router protected by the firewall.

Primary Log Host IP address of the primary firewall management station.

Log Host 1backup IP address of the first backup firewall management station.

Log Host 2backup IP address of the second backup management station.

Fast Path Reserved for future enhancements.

Default Policy Default policy on the router: block all or pass all.

Filter Timer Interval, in seconds, between attempts to download the filter from

the backup management station if the download is not successful

from the primary firewall management station.

Log Timer Interval, in seconds, between attempts

write to the log on the

backup management station if logging is not successful on the

primary firewall management station.

Idle Timer Keepalive Number of seconds that a TCP connection can remain inactive

before the local TCP host sends a TCP keepalive message to the

peer.

Retry Timeout Keepalive Interval, in seconds, at which a local TCP host retransmits

unacknowleged keepalive messages to the peer.

Retries Keepalive Number of unacknowledged keepalive messages that the local TCP

host retransmits before the TCP session is terminated.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

Sem comentários

Avaya FireWall-1 Manual do Utilizador Página 61