Avaya IP Telephony Guia de Configuração Página 148

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 147
148 Efficient Networking
P0604630 03
Bandwidth requirements on half duplex links
The following table provides bandwidth requirements for normal two-way voice calls on a
half-duplex link for a variety of link protocols, codec types and payload sizes.
Table 39 Bandwidth Requirements per Gateway port for half-duplex links
With no silence suppression, both the transmit path and the receive path continuously transmit
voice packets. Therefore, the peak bandwidth requirement per call on half-duplex links is:
Peak Bandwidth per call = 2(Continuous Transmission Rate)
(Half Duplex links, No Silence Suppression)
On half-duplex links with silence suppression enabled, the half-duplex nature of normal voice
calls allows the sender and receiver to share the same bandwidth on the common channel. While
the sender is talking, the receiver is quiet. Since only one party is transmitting at a time, silence
suppression reduces the peak bandwidth requirement per call on a half-duplex link to:
Peak Bandwidth per call = 1(Continuous Transmission Rate)
(Half Duplex links, With Silence Suppression)
Codec
Type
Payload
Size
Ethernet B/W
2
PPP B/W FR B/W
No SP
Silence
Suppression No SP
Silence
Suppression No SP
Silence
Suppression
ms peak
(kbit/s)
peak
(kbit/s)
Avg
(kbit/s)
peak
(kbit/s)
peak
(kbit/s)
Avg
(kbit/s)
peak
(kbit/s)
peak
(kbit/s)
Avg
(kbit/s)
G. 7 11
(
64 kb/s)
10 233.6 233.6
3
233.6
3
195.2 195.2
3
195.2
3
206.4 206.4
3
206.4
3
20* 180.8* 180.8
3
* 180.8
3
* 161.6* 161.6
3
* 161.6
3
* 167.2* 167.2
3
* 167.2
3
*
30 163.2 163.2
3
163.2
3
150.4 150.4
3
150.4
3
154.2 154.2
3
154.2
3
G. 7 29
(8 kb/s)
10 121.6 60.8 60.8 83.2 41.6 41.6 94.4 47.2 47.2
20* 68.8* 34.4* 34.4* 49.6* 24.8* 24.8* 55.2* 27.6* 27.6*
30 51.2 25.6 25.6 38.4 19.2 19.2 42.2 21.1 21.1
G.723.1
(6.3 kb/s)
30* 48.0* 24.0* 24.0* 35.2* 17.6* 17.6* 39.0* 19.5* 19.5*
G.723.1
(5.3 kb/s)
30* 45.8* 22.9* 22.9* 33.0* 16.5* 16.5* 36.8* 18.4* 18.4*
Notes:
1)
*
indicates payload sizes used by Business Communications Manager 2.5 for transmission. Other values listed indicate
payload sizes that BCM can receive.
2) Ethernet bandwidth includes the 14 byte Ethernet frame overhead plus a 12 byte inter-frame gap.
3) G.711 does not support silence suppression.
Vista de página 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 211 212

Comentários a estes Manuais

Sem comentários