Avaya Configuring RADIUS Manual do Utilizador descarregar pdf (Página 77)

Configuration Examples

117385-B Rev 00

C-3

Using the BCC

To enable RADIUS and configure the IP addresses for a RADIUS client and

server:

Start configuration mode by entering:

bcc>

config

Configure RADIUS on the box by entering:

box#

radius

Configure the RADIUS client on slot 3 and address 192.32.24.6 by

entering:

radius#

radius-client slot 3 address 192.32.24.6

Enable authentication for the RADIUS client on slot 3 by entering:

radius-client/3#

authentication enabled

Navigate to the top-level RADIUS prompt by entering:

radius-client/3#

back

Configure the RADIUS server on address 192.32.24.7 by entering:

radius#

radius-server address 192.32.24.7

Change the authentication-server-type to primary by entering:

radius-server/192.32.24.7#

authentication-server-type primary

Configure the primary-server-secret to baynet by entering:

radius-server/192.32.24.7#

primary-server-secret baynet

Using Site Manager

Before you begin, do the following:

Create and save a configuration file with at least one PPP interface.

Retrieve the configuration file in local, remote, or dynamic mode.

Specify the router hardware if this is a local-mode configuration.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 98 99

Sem comentários

Avaya Configuring RADIUS Manual do Utilizador Página 77