Avaya Configuring RADIUS Services Manual do Utilizador Página 68

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 82
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 67
Configuring RADIUS
C-2 116752 Rev. A
Configuring RADIUS Authentication
This example explains how to configure the router as a RADIUS authentication
client, and assumes the following:
The client is a BLN.
The network connections are all Raise DTR modem connections.
The WAN serial interface type is synchronous.
IP and RIP are the protocols for the client’s unnumbered circuit interface.
Dial optimized routing and one-way authentication are configured on the
remote routers.
A default route of 0.0.0.0 is configured on the remote routers to contact the
client.
F
igure C-1 shows the sample network for this example.
Figure C-1. Sample Network Using RADIUS Authentication
Before You Begin
Before you begin, do the following:
1. Create and save a configuration file with at least one PPP interface.
2. Retrieve the configuration file in local, remote, or dynamic mode.
3. Specify the router hardware if this is a local-mode configuration.
RADIUS server
RADIUS client
POTS
POTS
Remote
user B
Remote
user A
CR0002A
MODEM
MODEM
IP address: 192.32.24.7
IP address:192.32.24.6
Vista de página 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

Comentários a estes Manuais

Sem comentários