
Configuring Router Redundancy
114079 Rev. A 5-13
3. Enter the IP address of the device you want to configure as a resource for
this router redundancy group.
4. Click on OK.
The RREDUND Router Redundancy Resource List window appears. The IP
address you entered is highlighted in the list box. Site Manager supplies
default values for all parameters.
5. Enter values for any parameters you want to edit, using the descriptions
that follow this procedure for guidelines.
6. Repeat Steps 2 through 5 to configure additional resources.
7. Click on Done to exit the window and return to the Circuit Definition
window.
Router Redundancy Resource Parameter Descriptions
Use the following descriptions as guidelines when you edit router redundancy
resource parameters.
Parameter: Enable Status Update
Default: Enable
Options: Enable
| Disable
Function: This parameter is automatically set to Enable when you select Router
Redundancy from the Select Protocols window. If you set this parameter
to Disable, you prevent the router from checking on the availability of the
devices with which you configure it to communicate.
Instructions: Accept the default, Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.17.3.1.6
Comentários a estes Manuais