Avaya Bay Command Console Manual do Utilizador Página 27

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 120
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 26
Overview of the BCC Interface
117383-B Rev. 00
1-7
Platform Interface/Port Numbering
AN/ANH
<interface> <slot>/<connector>
<interface>
= Interface type: ethernet, token-ring, serial (etc.)
<slot>
number always = 1 (AN/ANH is a 1-slot device)
<connector>
numbering starts with connector 1.)
Example:
ethernet slot 1 connector 2
This is an Ethernet interface configured on AN/ANH connector 2, which exists on an
Ethernet adapter module. (Connectors 1 and 2 are on the base.)
ASN
<interface> <slot>/<module>/<connector>
<interface>
= Interface type: ethernet, token-ring, serial, (etc.)
<slot_number>
= 1, 2, 3, or 4, depending on the manual setting of the Module ID
switch on each ASN box. The switch indicates the position of specific ASN
chassis in a stackable ASN configuration.
<module>
numbering corresponds to Net Module numbering (1 to 4) on each
ASN box.
<connector>
numbering starts at 1 on each Net Module (per media type)
Example:
ethernet slot 2 module 3 connector 2
This is an Ethernet interface on connector 2 of Net Module 3, in ASN box 2 of a
stacked ASN configuration.
ARN
<interface> <slot>/<connector>
<interface>
= Interface type: ethernet, token-ring, serial (etc.)
<slot>
number always = 1
<connector>
numbering depends on the port type (LAN or WAN). LAN connector
numbering starts at 1 on the base module, which contains only LAN ports. LAN
connector numbering continues in ascending order, starting with the first LAN
port on an ARN expansion module. (The ARN expansion module plugs into the
ARN base module. ) WAN connector numbering starts with connector 1 on WAN
Adapter module 1, continues with connector 2 on WAN Adapter module 2, and
ascends sequentially with WAN connectors 3 through
n
on the ARN expansion
module.
Example:
ethernet/1/2
This interface is configured on LAN connector 2, which exists physically on an
Ethernet expansion module. (Ethernet connector 1 is on the base module.)
Example:
serial/1/3
This is a serial (WAN) interface configured on WAN connector 3, which exists
physically on the ARN expansion module.
Vista de página 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Comentários a estes Manuais

Sem comentários