Avaya v8.0 Manual do Utilizador descarregar pdf (Página 10)

RS; Reviewed:

SPOC 11/8/2010

Solution & Interoperability Test Lab Application Notes

10 of 23

BCMR6-ESNA-TOL8

To configure the private network that this newly added route will use, go to:

Configuration > Telephony > Dialing Plan > Private Network

Configure the private network as shown in Figure 8 below.

Figure 8: Dialing Plan – Private Network

The BCM used for compliance testing is set to 5 digit DN length and therefore the same format

is used when entering the values for the DN length under the private network.

The private network type can be either CDP or UDP depending on the site’s requirement.

While configuring the Public network under:

Configuration > Telephony > Dialing Plan > Public Network (not shown), the attribute for

Public Received number length also needs to be 5 and attribute for Public network dialing plan

needs to be Public (Unknown).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Sem comentários

Avaya v8.0 Manual do Utilizador Página 10