
Configuring IPv6 Services
A-20 118428-A Rev. A
IPv6 Static Route Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP6 > List Static Routes
Default: Enable
Options: Enable
| Disable
Function: Enables and disables this static route.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.2
Parameter: Prefix
Path: Configuration Manager > Protocols > IPv6 > List Static Routes
Default: None
Options: An IPv6 address prefix
Function: Supplies the destination IPv6 address prefix of this static route.
Instructions: You must supply an IPv6 address prefix for the static route definition.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.5
Parameter: Prefix Length
Path: Configuration Manager > Protocols > IPv6 > List Static Routes
Default: None
Options: 0 to 128 bits
Function: Supplies the length (in bits) of the address prefix for this static route.
Instructions: Indicate the length of the prefix you supplied with the Prefix parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1.6
Comentários a estes Manuais