
Chapter 5 Configuring VoIP trunks 105
IP Telephony Configuration Guide
Figure 35 Local gateway IP interface
2 Use the information in the table below to set up the Local Gateway IP interface record..
Table 19 Local Gateway IP interface fields
Field Value Description
Configuration note: Refer to “Using Radvision ECS 2.1.0.1 as the gatekeeper” on page 108 and “Using CSE
1000 as a gatekeeper” on page 109 for specific information about configuring the
gatekeeper for each application
Fallback to
Circuit-Switched
Enabled-All
Enabled-TDM-only
Disabled
SCNFallback
Your choice determines how the system will handle calls if
the IP network cannot be used.
• Enabled-All: All calls will be rerouted over specified TDM
trunks lines.
• Enabled-TDM-only: All voice calls will be rerouted over
specified TDM trunks lines.
• Disabled: Calls will not be rerouted.
Comentários a estes Manuais