Avaya Configuring SMDS Manual do Utilizador descarregar pdf (Página 51)

Editing SMDS Parameters

114069 Rev. A 4-7

Parameter: Heartbeat Poll Down Count

Default: 3 messages

Range: 1 to 1023 messages

Function: Speciﬁes the number of heartbeat poll messages that the router will send

without acknowledgment from the DSU before it declares the router/DSU

connection down. If you disable heartbeat polling, this parameter is

nonfunctional.

Instructions: Set to the number of unacknowledged heartbeat poll messages that the

router will tolerate before taking the router/DSU connection down. We

recommend that you accept the default.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.3.1.10

Parameter: LMI Network Mgmt

Default: Disable

Options: Enable

| Disable

Function: Enables or disables LMI network management.

LMI works with DXI Version 3.2. LMI is an SNMP-like protocol that

enables the router and the DSU/CSU to exchange management

information.

Instructions: Set to Enable to use the LMI protocol. Accept the default, Disable, if the

DSU/CSU in your network does not support the LMI.

Accept the default if you have an ADC Kentrox dual-port DataSMART

T1 SMDSU. This DSU does not support the LMI protocol. Instead, rely

on heartbeat polling to determine whether the interface between the router

and the DSU is active. Use the SMDS in-band SNMP agent to manage the

DSU.

If you have a single-port DataSMART T1 SMDSU, accept the default or

upgrade the DSU software to revision 1.41, which supports LMI.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.3.1.11

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Sem comentários

Avaya Configuring SMDS Manual do Utilizador Página 51