Avaya Configuring OSI Services Manual do Utilizador descarregar pdf (Página 114)

Configuring OSI Services

4-40

303535-A Rev 00

Parameter: Circuit Originate Pkts

Default: Enable

Options: Enable

Disable

Function: Specifies whether this circuit can originate TARP packets.

Instructions: If you want this circuit to originate TARP packets, accept the default,

Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.15.1.6

Configuring TARP Static Adjacencies

If you want the router to forward TARP packets to specific NSAP addresses, you

must configure TARP static adjacencies.

Adding a TARP Static Adjacency

To add a TARP static adjacency:

Select Protocols > OSI > Tarp > ADJ TARP in the Configuration

Manager window (refer to Figure 4-1).

The TARP Static Adjacencies window opens. It lists all defined TARP static

adjacencies. If you did not add any static adjacencies, none are listed.

Click on Add.

The Static Adjacencies Configuration window opens.

Set the Static Adjacent NSAP Address parameter.

Enter the address in hexadecimal format, including a 00 NSEL value at the

end of the NSAP address.

Click on OK.

The TARP Static Adjacencies window opens.

Click on Done.

You return to the Configuration Manager window.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 137 138

Sem comentários

Avaya Configuring OSI Services Manual do Utilizador Página 114