Avaya Configuring MPLS Services Manual do Utilizador descarregar pdf (Página 44)

Configuring MPLS Services

3-8

305754-A Rev 00

Specifying a Hold Time

The hold time is the number of seconds that LDP can wait without receiving a

keepalive packet from its peer entity before considering the LDP session down.

You can accept the default hold time, 40 seconds, or specify a hold time from 1 to

240 seconds.

To specify a hold time, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

MPLS

. The Edit MPLS Connector window opens.

3. Click on

LDP

. The LDP Session Records List window

opens.

4. Set the

Hold Time

parameter. Click on

Help

or see the parameter description on

page A-5.

5. Click on

Done

. You return to the Edit MPLS Connector

window.

6. Click on

Done

. You return to the Select Connection Type

window.

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 91 92

Comentários a estes Manuais

Sem comentários

Avaya Configuring MPLS Services Manual do Utilizador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring MPLS Services