
Customizing DVMRP
117355-C Rev 00
4-41
Advertising a Default Route
By default, DVMRP does not supply a default route on this interface.
You can use the BCC or Site Manager to enable and disable this feature as
required.
Using the BCC
Navigate to a DVMRP interface-level prompt and enter:
default-supply
<state>
state
is one of the following:
enabled
disabled
(default)
For example, the following command causes DVMRP to advertise a default route
over IP interface 2.3.4.5:
dvmrp/2.3.4.5#
default-supply enabled
dvmrp/2.3.4.5#
Using Site Manager
To advertise a default route:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
DVMRP
. The DVMRP menu opens.
4. Choose
Circuit
. The DVMRP Circuit Parameters window
opens.
5. Set the
Supply Default Route
parameter.
Click on
Help
or see the parameter
description on page A-10.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentários a estes Manuais