Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador descarregar pdf (Página 73)

Site Manager Line Services Parameters

117344-A Rev. A A-3

FDDI Line Parameters

Parameter: Hardware Filter

Path: Conﬁguration Manager > XCVR Connector (10BASE-T only) > Edit Line >

Edit CSMA/CD Parameters

Default: Disable (the default changes to Enable when, while adding the circuit, you reply

OK to the prompt:

Do you want to enable Hardware Filters on this circuit?)

Options: Enable

| Disable

Function: Enables ﬁltering hardware in the link or net module to drop local frames at the

interface instead of copying them into system memory. Enabling hardware

ﬁlters improves bridging software performance because router resources are not

used to receive and reject local frames.

Instructions: Set to Enable only if you enabled the bridge software and the link or net module

has hardware ﬁlters.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.29

Parameter: Enable

Path: Conﬁguration Manager > FDDI Connector > Edit Line > Edit FDDI

Parameters

Default: Enable

Options: Enable

| Disable

Function: Enables or disables the FDDI circuit for the selected connector.

Instructions: Set to Enable or Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.4.4.1.2

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 93 94

Sem comentários

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador Página 73