1
In the navigation pane, select the switch stack.
2
Select the unit type that is to be added to the stack from the
Palette tab.
3
Click the Paste button, or double-click the unit type that is to
be added to the stack.
4
Select the newly created unit in the navigation pane and
adjust the unit number in the Basic tab in the Properties
area.
5
Select the newly created unit in the navigation pane and then
select the MDA type that is to be added to the new switch
unit from the Palette tab.
6
Click the Paste button or double-click the MDA type that is to
be added to the switch.
7
Expand the added unit in the navigation pane and then
expand the MDA.
8
Select a port under the MDA object in the navigation pane.
9
Configure Basic, VLAN, STP, and IGMP parameters in the
Properties tab as appropriate.
Configure ports
By default, all unconfigured ports are untagged links in the
default port-based VLAN (VLAN 1), participate in normal
learning STP, and autonegotiate line speed.
1
In the navigation pane, expand the standalone switch, stack
unit, or MDA to select switch ports.
2
In the Properties tab, choose the Basic, VLAN, STP, or IGMP
configuration tab.
NOTE:
Selecting multiple ports (Ctrl-Click or Shift-Click) and
then modifying parameters from the Properties tab changes
those parameters for all selected ports.
Configure VLANs
You can configure port-based, protocol-based, or MAC source
address VLANs.
1
In the navigation pane, expand the device and select the
device VLANs folder.
NOTE:
Use the device VLANs folder to create VLANs and to
configure VLAN ports. The system VLANs folder shows the
VLANs configured on all devices in the database.
2
In the Palette tab, choose a port-based, protocol-based, or
MAC source address (SA)-based VLAN type.
3
In the navigation pane, select the VLAN. In the Properties
tab, type a descriptive name to identify the VLAN.
4
In the navigation pane, expand the switch and select ports to
participate in the VLAN.
5
Create shortcuts from the ports to the VLAN. Copy the ports, and paste them as shortcuts on the VLAN.
6
In the navigation pane, select the VLAN ports. In the
Properties tab, configure the VLAN port properties.
Click the VLAN tab to display the VLAN port properties.
Configure an MLT
You can configure from one through six multilink trunk (MLT)
groups.
1
In the navigation pane, expand the switch and select two,
three, or four Ethernet ports.
2
Create shortcuts from the ports to one of the six MLT
templates.
3
Copy the ports, and then paste them as shortcuts on the
MLT.
4
In the navigation pane, select the MLT.
5
In the Properties tab, type a descriptive name to identify the
trunk.
6
From the Status list, choose Enabled.
Configure an SNMP trap receiver
1
In the navigation pane, expand the switch and select SNMP.
2
In the Properties tab, click the green plus sign (+) to add an
item to the Trap Receivers table.
3
Enter the IP address and community string for each trap
receiver.
(3 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais