Avaya H323 Manual do Utilizador descarregar pdf (Página 56)

H323 Phone Install Page 56

15-601046 Issue 15b (16 July 2009)IP Office 4.2

4.3 View Details

You can use the following procedure to view a number of phone details. These are in addition to the other static address

and local administration options which can also be used to review settings.

1.While the phone is on-hook and idle, press the following sequence: MUTE 8 4 3 9 # (MUTE V I E W #).

· To display the set of details, press * at any time during viewing.

· To end the procedure and restore the user interface to its previous state, press #.

2.A sequence of values are displayed. The values available may vary between phone models and the level of IP

phone software installed on the phone. To display the next value press *. To exit the information display press #.

· Model

Shows the phones model number; for example, 4624D02A.

· Market

Shows 1 for export or 0 for domestic (US). Not displayed on all phone types.

· Phone SN

Shows the phone's Serial Number.

· PWB SN

Shows the phone's Printed Wiring Board Serial Number.

· PWB comcode

Shows the PWB's comcode.

· MAC address

Shows the phone's MAC address as paired hexadecimal numbers.

· L2 tagging

Indicates whether L2 tagging is on, off or set to auto.

· VLAN ID

The VLAN ID used for the phone. The default is 0.

· IP address

The IP address assigned to the phone.

· Subnet mask

The subnet mask assigned to the phone.

· Router

The router address assigned to the phone.

· File server

The address of the file server assigned to the phone.

· Call server

The address of the phone's H323 Gatekeeper.

· 802.1X

The current setting for 802.1X operation if being used.

· Group

This displays the group value set on the phone. Group values can be used to control which options (both

firmware and settings) a phone downloads. Refer to the 4600 Series Phones LAN Administrator Guide.

· Protocol

Display Default.

· filename1

Shows the name of the phone application file in the phone's memory. These are values from within the boot

file loaded and not the actual file name.

· 10MBps Ethernet or 100Mbps Ethernet

Shows the speed of the detected LAN connection.

· filename2

Shows the boot file name and level. These are values from within the boot file loaded and not the actual file

name.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 93 94

Comentários a estes Manuais

Sem comentários

Avaya H323 Manual do Utilizador Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Telefones IP Avaya H323